Interior door frieze 42 mm
Our interior door friezes consist of weak cover layers and an extra glued middle layer, thereby guaranteeing great stability. The cross-section of folding or profile banding is adapted to the usual tools.
Top layers made from solid wood (no veneer) ensure clean edges, meaning no chipping of the edges and profiles during subsequent work steps. The outer bars have a width of at least 22 mm.
The inner door stiles and rails are glued D3 according to DIN EN 204 and basically have knot-free edges on both sides. Consisting of a softwood core with finger-jointed head and end pieces of the respective type of wood for the stiles. Thanks to an approx. 3.5 mm thick top layer, the glue joint in the profile is not visible.
Technical details
Types of wood
spruce, pine, knotty larch,
european oak, ash (natural, light), european maple, birch and more.
oak euro. = core through and through oak
Widths
95 mm, 120 mm, 140 mm, 160 mm
Lengths
2050 mm, 900 mm, 700 mm, 600 mm,
excess lengths: 2150 mm, 2250 mm, 2500 mm
Length distribution
2 long to 3 short parts
Gluing
D3 - according to DIN EN 204
Suitable for:
